DVP-ES2-EX2-SS2-SA2-SX2-Operation Manual

2. Programming Concepts
Function Group ID of right side modules on ES2/EX2
Number
D1320~ D1327
Contents:
When right side modules are connected on ES2/EX2, the ID of each I/O module will be stored in
D1320~D1327 in connection order.
ID of each special module:
Name ID (HEX) Name ID (HEX)
DVP04AD-E2 H’0080 DVP06XA-E2 H’00C4
DVP02DA-E2 H’0041 DVP04PT-E2 H’0082
DVP04DA-E2 H’0081 DVP04TC-E2 H’0083
Function Group ID of left side modules on SA2/SX2
Number
D1386~D1393
Contents:
When left side modules are connected on SA2/SX2, the ID of each I/O module will be stored in
D1386~D1393 in connection order.
ID of each special module:
Name ID (HEX) Name ID (HEX)
DVP04AD-SL H’4480 DVP01HC-SL
H’4120
DVP04DA-SL H’4441 DVP02HC-SL H’4220
DVP04PT-SL H’4402 DVPDNET-SL H’4131
DVP04TC-SL H’4403 DVPEN01-SL H’4050
DVP06XA-S L
H’6404 DVPMDM-SL H’4040
DVP01PU-SL H’4110 DVPCOPM-SL H’4133
Function Group Output clear signals when ZRN is completed
Number
M1346
Contents:
When M1346 = ON, PLC will output clear signals when ZRN is completed. The clear si gnals to Y0,
Y1 will be sent by Y4 for 20ms, and the clear signals to Y2, Y3 will be sent by Y5 for 20ms.
Function Group
Number
Contents:
PLC LINK
M1350-M1356, M1360-M1439, D1355-D1370, D1399, D1415-D1465, D1480-
D1991
1. PLC LINK supports COM2 (RS-485) with communication of up to 16 slaves and access of up
to 50 words.
2. Special D and special M corresponding to Slave ID1~ Slave ID8: (M1353 = OFF, access
available for only 16 words)
2-73