DVP-ES2-EX2-SS2-SA2-SX2-Operation Manual

DVP-ES2/EX2/SS2/SA2/SX2/SE Operation Manual - Programming
Current
Temperature
Analog input mode Upper limit value Lower limit value
-20 mA~+20 mA +32384 -32384
+4 mA~+20 mA +32384
-384
PT100/PT1000 +8100 -1900
NI100/NI1000 +1800 -900
Device
number
D1115
Function
20EX2/SX2 analog input/output mode setting (Default=
H’0)
bit0~bit5: Selection between the voltage/current mode ( 0: Voltage; 1: Current;
Defa ult: Voltage)
bit0~ bit3: Analog inputs (AD0~AD3)
bit4~ bit5: Analog outputs (DA0~ DA1)
bit8~bit 13: Current mode
bit8~bit11: AD0~AD 3 (0: -20 mA ~20 mA; 1: 4~20 mA)
bit12~bit13: DA0~DA1 (0: 0~20 mA; 1: 4~20 mA)
30EX2 analog input/output mode setting (Default=H’FFFF)
The description of D1115 for 30EX2:
Bit15~12 Bit11~8 Bit7~4 Bit3~0
Analog output Analog input Analog input Analog input
mode of DA0 mode of AD2 mode of AD1 mode of AD0
The analog input modes for 30EX2:
Code 0x0 0x1 0x2 0x3
De scription Tow-wire PT100 Three-wire NI100 Two-wire PT1000 Two-wire NI1000
Code 0x4 0x5 0x6 0x7
Description Three-wire PT100 Three-wire NI100 Three-wire PT1000 Three-wire NI1000
Code 0x8 0x9 0xA 0xB
Description
Voltage: Voltage: Voltage:
Current:
-10 V~+10 V -5 V~+5 V +1 V~+5 V -20 mA~+20 mA
Code 0xC 0xD 0xE 0xF
Description
Current:
+4 mA~+20 mA
Reserved
Unused
T he analog output modes for 30EX2:
Code 0x0 0x1 0x2 0xF
De scription
Voltage:
Current:
Current:
-10 V~+10 V +0 mA~+20 mA +4 mA~+20 mA
U nused
The example of setti ng D1115 for 30EX2:
If the analog input mo de of AD0 is the two-wire NI100, the analog input mo de of AD1 is the
three-wire 1000, the analog input mode of AD2 is the voltage mod e (+1 V~ +5 V), and the
analog output mode of DA0 is the curren t mode (+4 mA ~ +20 mA), the setting value in
D 1115 is H’2A61.
2-68