DEFINITY Communications System Generic 2 and System 85

To mute the microphone
associated with the
handset so the other
party cannot hear you
1 Press Mute
• Red light next to Mute goes on and the other
party cannot hear you
2 Press Mute again to resume talking to the other party
through handset
• Red light next to Mute goes off and the other
party can hear you again
To activate the speaker
while using the handset
1 Press Speaker
• Red light next to Speaker and the red light next
to Mute go on steadily
• The speaker is active, and the handset is turned
off
To end a call (while
handset is on-hook
and only the speaker is
active)
1 Press Speaker
• Red light next to Speaker and the red light next
to Mute go off
Speakerphone
Note: If you are uncertain whether your voice terminal is set for the Speaker
(listen-only) feature or the Speakerphone (listen and talk) feature, check with your
system manager.
Use the following procedures if your voice terminal is set for the Speakerphone
(speak and listen) feature.
If the Reset Spkr label appears under the Speaker button on your 8434DX voice
terminal, you can use the Reset Speakerphone feature. For directions on using the
Reset Speakerphone feature, see “Reset Speakerphone” in this section.
To place/answer a call
without lifting the
handset, or to use the
speakerphone with
any feature
1 Press Speaker
• Red light next to Speaker goes on steadily
2 Place or answer a call, or access the selected feature
3 Adjust speakerphone volume if necessary
• To raise the volume, press the right half of the
Volume control button labeled ;
to lower the volume, press the left half of the
Volume control button labeled
36