DEFINITY Communications System Generic 2 and System 85
DEFINITY Communications System Generic 2 and System 85
DEFINITY Communications System Generic 2 and System 85
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
To select a personalized<br />
ringing pattern (for those<br />
8434DX voice terminals<br />
which have a Ring<br />
button)<br />
1 While on-hook, press Ring<br />
• Red light next to Ring winks<br />
• Current ringing pattern plays <strong>and</strong> repeats every<br />
three seconds.<br />
• The display shows the ringing pattern you are<br />
hearing, such as:<br />
SELECT RING PATTERN: 1<br />
2 Cycle through the ringing patterns by pressing (<strong>and</strong><br />
then releasing) Ring<br />
• Red light next to Ring continues to wink<br />
• The display shows the number of the ringing<br />
pattern you have selected<br />
Note: You can also press Next or Prev ) to<br />
cycle through all eight ringing patterns<br />
3 If you want to save the ringing pattern currently<br />
being played, don’t press Ring anymore. You will hear<br />
the selected ringing pattern two more times, <strong>and</strong> then<br />
it will be automatically saved.<br />
• You hear confirmation tone (two rising tones)<br />
• Red light next to goes Ring off<br />
Note: If you receive a call, go off-hook, or lose power<br />
during selection, the process is interrupted <strong>and</strong> you<br />
must start again.<br />
To adjust ringer volume<br />
if necessary (h<strong>and</strong>set <strong>and</strong><br />
speaker are not active, or<br />
the h<strong>and</strong>set <strong>and</strong> ringer<br />
are both active)<br />
1 To raise the volume, press the right half of the<br />
Volume control button labeled ;<br />
to lower the volume, press the left half of the<br />
Volume control button labeled<br />
33