DEFINITY Communications System Generic 2 and System 85

When you first power up the voice terminal, the following display appears.
Begin
PLEASE RESET SPKR.
Cancel
To reset the speakerphone
(when the voice terminal
is first powered up)
1 Press the softkey below Begin to reset the
speakerphone
(Press the softkey below Cancel if you do not want to
reset the speakerphone at this time. However, note
that the red light next to Speaker will continue to
flutter.)
• If you press the softkey below Begin, the display
shows the following timed screen:
OPTIMIZING PERFORMANCE
OF THE SPEAKERPHONE.
• You will hear a set of rising tones as the
speakerphone adjusts itself to the surrounding
acoustical environment. These tones are
automatic. No user response is required.
To adjust the
speakerphone to the
surrounding room
acoustics
1 While on-hook, press Shift
• Red light next to Shift goes on steadily
2 Press Speaker
• Red light next to Shift goes off
• Red light next to Speaker flutters intermittently
• You hear a series of tones as the speakerphone
performs an acoustic test of the environment.
The display shows:
OPTIMIZING PERFORMANCE
OF THE SPEAKERPHONE.
When the tones stop, your built-in speakerphone
is ready for use.
31