DEFINITY Communications System Generic 2 and System 85
DEFINITY Communications System Generic 2 and System 85
DEFINITY Communications System Generic 2 and System 85
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
To dial a call to a member<br />
of your Dial Intercom<br />
group<br />
1 While off-hook, press Icom Dial xxx [dial tone]<br />
2 Dial the group member’s 1- or 2-digit code<br />
[ringback tone]<br />
• Intercom ring is sent<br />
To answer any intercom<br />
call<br />
1 Pick up the h<strong>and</strong>set <strong>and</strong> press Icom<br />
• You are connected to the call<br />
Note: If you are active on another call, first<br />
press Hold , then press the Icom button next to the<br />
flashing light.<br />
Last Number Dialed<br />
To automatically redial<br />
the last number you<br />
dialed (extension, outside<br />
number, or trunk/feature<br />
access code)<br />
1 While on-hook or off-hook, press Last Dialed<br />
or Dial the Last Number Dialed access code<br />
__________ (while off-hook)<br />
• Number is automatically dialed (up to 20 digits)<br />
Note: Available with <strong>DEFINITY</strong> <strong>Generic</strong> 2 <strong>and</strong> with<br />
<strong>System</strong> <strong>85</strong> R2V4 <strong>and</strong> some R2V3 systems. Check<br />
with your system manager to learn if the feature is<br />
available on your system.<br />
Limitations on this feature should be noted. Digits<br />
dialed via Abbreviated Dialing, feature dial codes,<br />
authorization codes, <strong>and</strong> Station Message Detail<br />
Recording (SMDR) account codes are not retained in<br />
memory <strong>and</strong> must be redialed for each call.<br />
To see the number you<br />
last dialed (you must be<br />
on-hook)<br />
1 While on-hook, press Last Dialed<br />
• Last number dialed is shown on the display screen<br />
27