DEFINITY Communications System Generic 2 and System 85

More documents

Recommendations

Info

Hold ✔ To keep a call waiting while you answer another call, make a call, or perform some other task 1 Press Hold • Green light next to the held call flutters Note: If you put a conference call on hold, the other parties remain connected. To answer a new call while active on another 1 Press Hold • Green light next to the held call flutters 2 Press the call appearance button of the incoming call • You are connected to the incoming call To return to the held call 1 Press the call appearance button of the held call • You are connected to the held call Note: If you are active on a call and you press the call appearance button of the held call, the active call will be dropped. Intercom (Automatic/Dial) To make a call to your predetermined Automatic Intercom partner 1 While off-hook, press • Intercom ring is sent Icom Auto xxx [ringback tone] 26
To dial a call to a member of your Dial Intercom group 1 While off-hook, press Icom Dial xxx [dial tone] 2 Dial the group member’s 1- or 2-digit code [ringback tone] • Intercom ring is sent To answer any intercom call 1 Pick up the handset and press Icom • You are connected to the call Note: If you are active on another call, first press Hold , then press the Icom button next to the flashing light. Last Number Dialed To automatically redial the last number you dialed (extension, outside number, or trunk/feature access code) 1 While on-hook or off-hook, press Last Dialed or Dial the Last Number Dialed access code __________ (while off-hook) • Number is automatically dialed (up to 20 digits) Note: Available with DEFINITY Generic 2 and with System 85 R2V4 and some R2V3 systems. Check with your system manager to learn if the feature is available on your system. Limitations on this feature should be noted. Digits dialed via Abbreviated Dialing, feature dial codes, authorization codes, and Station Message Detail Recording (SMDR) account codes are not retained in memory and must be redialed for each call. To see the number you last dialed (you must be on-hook) 1 While on-hook, press Last Dialed • Last number dialed is shown on the display screen 27
Page 1 and 2: DEFINITY ® Communications System G
Page 3 and 4: Your 8434DX Voice Terminal The 8434
Page 5 and 6: Expansion Module jack (on back of v
Page 7 and 8: Volume control button For adjusting
Page 9 and 10: Call Forwarding — Busy/Don’t An
Page 11 and 12: a short period of time. After the v
Page 13 and 14: Conventions Used in The Following P
Page 15 and 16: (the Leave Word Calling feature). I
Page 17 and 18: Resetting the Speakerphone with the
Page 19 and 20: 5 Dial the outside number, extensio
Page 21 and 22: 3 Pick up the handset when you hear
Page 23 and 24: Call Forwarding — Busy/Don’t An
Page 25 and 26: Call Park To park a call (for retri
Page 27: To drop the last party added to a c
Page 31 and 32: To cancel a Leave Word Calling mess
Page 33 and 34: When you first power up the voice t
Page 35 and 36: To select a personalized ringing pa
Page 37 and 38: Speaker Note: Your voice terminal i
Page 39 and 40: • The display shows: SPEAKER L >
Page 41 and 42: Display Feature Procedures This sec
Page 43 and 44: To see a coworker’s messages (can
Page 45 and 46: Tones and Their Meaning Ringing ton
Page 47 and 48: Problem The telephone doesn’t rin
Page 49 and 50: on-hook When the handset is left on
Page 51 and 52: Contents Your 8434DX Voice Terminal
Page 53 and 54: Blind Perf Quick Reference Lists FE

DEFINITY Communications System Generic 2 and System 85

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?