DEFINITY Communications System Generic 2 and System 85

To program an
Abbreviated Dialing (AD)
button
1 While off-hook, press Menu and then press the
softkey below Prog
or Press Program (while off-hook)
or Dial the Abbreviated Dialing Program
access code __________ (while off-hook)
[confirmation tone]
2 Press the selected AD xxxxx
3 Dial the outside number, extension, or feature access
code you want to store
Note: You may also be able to use the softkeys to
add special functions such as Pause, Mark, or Wait
into the telephone numbers programmed on the
AD button.
4 Press AD xxxxx again [confirmation tone]
5 Hang up or press Drop to end programming
To see the number stored
on an Abbreviated Dialing
(AD) button
1 While on-hook, press the selected AD xxxxx
• Stored number is shown
2 Press Exit to return to the normal display or repeat
Step 1 to see another number
To place a call using an
Abbreviated Dialing (AD)
button
1 While off-hook, press the selected AD xxxxx
• Call is automatically dialed [ringback tone]
Automatic Callback
To automatically place
another call to an
extension that was
frequently busy
1 Press Menu and then press the softkey below
AutCB before or during call attempt
or Press Auto Callback before or during the call
attempt
[dial or confirmation tone].
or Dial the Automatic Callback access code before
the call attempt __________
[dial tone]
2 Hang up (within seven seconds) or press Drop
• You will get a 3-burst priority ring when both your
voice terminal and the called extension are idle
18