Policy Framework Configuration Guide - Juniper Networks

Chapter 16: Summary of Traffic Sampling, Forwarding, and Monitoring Configuration Statements
family
See the following sections:
• family (Filtering) on page 393
• family (Monitoring) on page 394
• family (Port Mirroring) on page 395
• family (Sampling) on page 396
family (Filtering)
Syntax family family-name {
filter {
input input-filter-name;
output output-filter-name;
}
flood {
input filter-name;
}
route-accounting;
}
Hierarchy Level
[edit forwarding-options]
Release Information Statement introduced before Junos OS Release 7.4.
route-accounting option introduced in Junos OS Release 8.3; supported only with IPv6.
Description
Specify address family for filters.
Options family-name—Address family. Specify inet for IP version 4 (IPv4), inet6 for IP version 6
(IPv6), mpls for MPLS, or vpls for virtual private LAN service (VPLS).
NOTE: In Junos OS Release 8.4 and later, the output statement is not valid
at the [edit forwarding-options family vpls filter] hierarchy level.
The remaining statements are explained separately.
Required Privilege
Level
Related
Documentation
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
• Applying Filters to Forwarding Tables on page 363
Copyright © 2010, Juniper Networks, Inc.
393