Policy Framework Configuration Guide - Juniper Networks

Junos 10.4 Policy Framework Configuration Guide
(stamp | no-stamp);
(world-readable | no-world-readable);
}
flow-active-timeout seconds;
flow-inactive-timeout seconds;
flow-server hostname {
aggregation {
autonomous-system;
destination-prefix;
protocol-port;
source-destination-prefix {
caida-compliant;
}
source-prefix;
}
autonomous-system-type (origin | peer);
(local-dump | no-local-dump);
port port-number;
source-address address;
version format;
version9 {
template template-name;
}
}
interface interface-name {
engine-id number;
engine-type number;
source-address address;
}
}
}
input {
max-packets-per-second number;
maximum-packet-length bytes;
rate number;
run-length number;
}
traceoptions {
file filename {
files number;
size bytes;
(world-readable | no-world-readable);
}
}
}
Minimum Traffic Sampling Configuration
To configure traffic sampling, you must perform at least the following tasks:
1. Create a firewall filter to apply to the logical interfaces being sampled by including
the filter statement at the [edit firewall family family-name] hierarchy level. In the filter
then statement, you must specify the action modifier sample and the action accept.
[edit firewall family family-name]
346
Copyright © 2010, Juniper Networks, Inc.