Policy Framework Configuration Guide - Juniper Networks

Junos 10.4 Policy Framework Configuration Guide
excess-burst-size
Syntax
excess-burst-size bytes;
Hierarchy Level
[edit firewall three-color-policer policer-name single-rate]
Release Information Statement introduced in Junos OS Release 7.4.
Description
Configure the maximum number of bytes allowed for incoming packets to burst above
the committed information rate and still be marked with medium-high packet-loss priority
(yellow). Packets that exceed the excess burst size (EBS) are marked with high
packet-loss priority (red).
NOTE: When you include the excess-burst-size statement in the configuration,
you must also include the committed-burst-size and
committed-information-rate statements at the same hierarchy level.
Options
bytes—Number of bytes. You can specify a value in bytes either as a complete decimal
number or as a decimal number followed by the abbreviation k (1000),
m (1,000,000), or g (1,000,000,000).
Range: 1500 through 100,000,000,000 bytes
Required Privilege
Level
firewall—To view this statement in the configuration.
firewall-control—To add this statement to the configuration.
320
Copyright © 2010, Juniper Networks, Inc.