Policy Framework Configuration Guide - Juniper Networks

Chapter 12: Summary of Firewall Filter and Policer Configuration Statements
committed-information-rate
Syntax
committed-information-rate bits-per-second;
Hierarchy Level
[edit firewall three-color-policer policer-name single-rate]
[edit firewall three-color-policer policer-name two-rate]
Release Information Statement introduced in Junos OS Release 7.4.
Description
Configure the guaranteed bandwidth under normal line conditions, and the average rate
up to which packets are marked with low packet-loss priority (green).
NOTE: When you include the committed-information-rate statement in the
configuration, you must also include the committed-burst-size statement at
the same hierarchy level.
Options
bits-per-second—Number of bits per second. You can specify a value in bits per second
either as a complete decimal number or as a decimal number followed by the
abbreviation k (1000), m (1,000,000), or g (1,000,000,000).
Range: 32,000 through 40,000,000,000 bps
Required Privilege
Level
firewall—To view this statement in the configuration.
firewall-control—To add this statement to the configuration.
Copyright © 2010, Juniper Networks, Inc.
319