Policy Framework Configuration Guide - Juniper Networks

Chapter 12: Summary of Firewall Filter and Policer Configuration Statements
color-blind
Syntax
color-blind;
Hierarchy Level
[edit firewall three-color-policer policer-name single-rate]
[edit firewall three-color-policer policer-name two-rate]
Release Information Statement introduced in Junos OS Release 7.4.
Description
Configure the way preclassified packets are metered. In color-blind mode, the local router
ignores the preclassification of packets and can assign a higher or lower packet-loss
priority. For example, suppose an upstream router assigned medium-high packet-loss
priority to a packet because the packet exceeded the committed information rate on the
upstream router interface. The local router can change the packet-loss priority to low if
the packet conforms to the configured committed information route on the local router
interface.
Default
If you omit the color-blind statement, the default behavior is color-aware mode.
Required Privilege
Level
Related
Documentation
firewall—To view this statement in the configuration.
firewall-control—To add this statement to the configuration.
• color-aware on page 316
Copyright © 2010, Juniper Networks, Inc.
317