Policy Framework Configuration Guide - Juniper Networks

Chapter 4: Routing Policy Configuration
policy-statement export-exact {
term a {
from {
protocol bgp;
route-filter 201:db8::8000/32 exact;
}
then {
accept;
}
}
term b {
then {
reject;
}
}
}
Example: Using Routing Policy in an ISP Network
This section provides an example of how policies might be used in a typical Internet
service provider (ISP) network. In this network example (see Figure 11 on page 83), the
ISP’s AS number is 1000. The ISP has two transit peers (AS 11111 and AS 22222) to which
it connects at an exchange point. The ISP is also connected to two private peers (AS 7000
and AS 8000) with which it exchanges specific customer routes. The ISP has two
customers (AS 1234 and AS 2468) to which it connects using BGP.
Figure 11: ISP Network Example
Copyright © 2010, Juniper Networks, Inc.
83