Policy Framework Configuration Guide - Juniper Networks

Chapter 4: Routing Policy Configuration
accept;
}
}
term two {
from {
protocol bgp;
route-filter 10.2.0.0/16 orlonger;
}
then {
install-nexthop lsp mc-c-lsp-2;
accept;
}
}
term three {
from {
protocol bgp;
route-filter 10.3.0.0/16 orlonger;
}
then {
install-nexthop lsp mc-c-lsp-3;
accept;
}
}
}
}
protocols {
mpls {
label-switched-path mc-c-lsp-1 {
from 10.10.20.101;
to 10.10.20.103;
}
label-switched-path mc-c-lsp-2 {
from 10.10.20.101;
to 10.10.20.103;
}
label-switched-path mc-c-lsp-3 {
from 10.10.20.101;
to 10.10.20.103;
}
}
}
Example: Grouping Destination Prefixes
Configure a routing policy to group destination prefixes.
[edit]
policy-options {
policy-statement set-dest-class {
term 1 {
from community nets1;
then {
destination-class on-net;
accept;
}
Copyright © 2010, Juniper Networks, Inc.
79