SERVICE MANUAL - JUKI

More documents

Recommendations

Info

6. SHUTTLE COVER Disassembling 1. Remove screw (1) and take out securing plate (2). 2. Remove shuttle cover (3) extracting as indicated by arrow. SECTION 1 PAGE 5 * Re-assembling should be done in the reverse way.
7. Hand wheel SECTION 1 PAGE 6 Re-assembling 1. Set washer (a) and washer (b) in position as illustrated and fix them by tightening stud screw (c) by hand. 2. Set clutch wheel (d) in position so that its projected portion may be positioned as illustrated. 3. Fix clutch wheel (d) with screw and tighten it clockwise. ** Disassembling should be done in reverse way.
Page 1 and 2: ® SEWING MACHINE HZL-25Z SERVICE M
Page 3 and 4: 3. Face cover SECTION 1 PAGE 2 Disa
Page 5: 5. FRONT COVER Disassembling 1. Rem
Page 9 and 10: 2 - 1 L - R positioner SECTION 2 -
Page 11 and 12: 2 - 3 Needle Position at Zigzag Sti
Page 13 and 14: 2 - 5 Feed Dog Height SECTION 2 - 5
Page 15 and 16: 2 - 7 Feed Dog Lateral positioning
Page 17 and 18: SECTION 2 -8 PAGE 2 Lateral Movemen
Page 19 and 20: 2 - 10 Buttonhole sewing - "0" feed
Page 21 and 22: SECTION 2 - 12 PAGE 1 2 - 12 Balanc
Page 23 and 24: 2 - 14 Needle Height SECTION 2 - 14
Page 25 and 26: Adjustment if needle touches needle
Page 27 and 28: Checking rotating direction of shut
Page 29 and 30: 2 - 17 Control panel pointer positi
Page 31 and 32: 2 - 19 Hooking Fork Position of Nee
Page 33 and 34: 2 - 20 Bobbin Winder SECTION 2 - 20
Page 35: ® 8-2-1, KOKURYO-CHO, CHOFU-SHI, T

SERVICE MANUAL - JUKI

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?