SERVICE MANUAL - JUKI
SERVICE MANUAL - JUKI SERVICE MANUAL - JUKI
[ 1 ] DISASSEMBLING OF OUTER PARTS SECTION 1 PAGE 1 1. Base cover 1. Lower presser foot and lay machine. 2. Remove 3 screws (1) and take out base cover (2). * Re-assembling should be done in the reverse way. 2. Gear cover 1. Remove screw (1) and take out gear cover (2). * Re-assembling should be done in the reverse way.
3. Face cover SECTION 1 PAGE 2 Disassembling 1. Raise presser foot lifter (1). 2. Remove screw (2) and take out face cover (3). Re-assembling 1. Raise presser foot lifter (1). 2. Insert presser foot lifter (1) into small window (4) of face cover (3). 3. Insert jut (6) of face cover (3) into hole (5) of arm. 4. Fix screw (2) fitting face cover profile to arm profile.
- Page 1: ® SEWING MACHINE HZL-25Z SERVICE M
- Page 5 and 6: 5. FRONT COVER Disassembling 1. Rem
- Page 7 and 8: 7. Hand wheel SECTION 1 PAGE 6 Re-a
- Page 9 and 10: 2 - 1 L - R positioner SECTION 2 -
- Page 11 and 12: 2 - 3 Needle Position at Zigzag Sti
- Page 13 and 14: 2 - 5 Feed Dog Height SECTION 2 - 5
- Page 15 and 16: 2 - 7 Feed Dog Lateral positioning
- Page 17 and 18: SECTION 2 -8 PAGE 2 Lateral Movemen
- Page 19 and 20: 2 - 10 Buttonhole sewing - "0" feed
- Page 21 and 22: SECTION 2 - 12 PAGE 1 2 - 12 Balanc
- Page 23 and 24: 2 - 14 Needle Height SECTION 2 - 14
- Page 25 and 26: Adjustment if needle touches needle
- Page 27 and 28: Checking rotating direction of shut
- Page 29 and 30: 2 - 17 Control panel pointer positi
- Page 31 and 32: 2 - 19 Hooking Fork Position of Nee
- Page 33 and 34: 2 - 20 Bobbin Winder SECTION 2 - 20
- Page 35: ® 8-2-1, KOKURYO-CHO, CHOFU-SHI, T
3. Face cover<br />
SECTION 1<br />
PAGE 2<br />
Disassembling<br />
1. Raise presser foot lifter (1).<br />
2. Remove screw (2) and take out face cover (3).<br />
Re-assembling<br />
1. Raise presser foot lifter (1).<br />
2. Insert presser foot lifter (1) into small window (4) of face cover (3).<br />
3. Insert jut (6) of face cover (3) into hole (5) of arm.<br />
4. Fix screw (2) fitting face cover profile to arm profile.