Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
2 - 9 "0" - Feeding Needle Positioning<br />
SECTION 2 - 9<br />
PAGE 1<br />
Checking:<br />
1 Set stitch length control at "0", and selector dial at "Straight Stitching A".<br />
2. Place paper under presser foot and take 11 stitches without thread.<br />
3. Deviation of all stitches must be within 0.6 mm in forward direction (about<br />
2/3 of needle thickness).<br />
Adjustment:<br />
1. Inserting the plus screw driver through the hole and adjust the screw inside<br />
of the machine.<br />
Fig. a ) ð Turn anti-clockwise.<br />
Fig. d ) ð Turn clockwise.