Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
2 - 5 Feed Dog Height<br />
SECTION 2 - 5<br />
PAGE 1<br />
Checking:<br />
1. Set stitch length control at "Maximum", and selector dial at "Straight Stitching A".<br />
2. Remove needle and presser foot.<br />
3. Set feed dog at highest position by turning hand wheel by hand.<br />
4. Check to see if feed dog height (A) is 1.0 mm from needle plate.<br />
Adjustment:<br />
Adjust feed dog height by inserting the minus screw driver into feed lifting arm<br />
(1) and moving it up or down.<br />
Feed dog too low ð Turn the screw driver clockwise.<br />
Feed dog too high ð Turn it anti-clockwise.
Change language