Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
2 - 4 Clearance between zigzag cam and cam follower<br />
SECTION 2 - 4<br />
PAGE 1<br />
Checking:<br />
1. Remove presser foot.<br />
2. Set machine at "zigzag stitching C, (maximum width)" by turning selector dial.<br />
3. Lower needle to left side and its lowest position.<br />
4. Turn selector dial towards you (anti-clockwise) and set it between "zigzag<br />
stitching (maximum width)" and "blind stitching".<br />
5. Check if needle point moves about 0.35 mm from above "3" position to left.<br />
Adjustment:<br />
1. Remove side cover.<br />
2. Turn screw (1).<br />
Less than 0.35 mm ð Turn it clockwise.<br />
More than 0.35 mm ð Turn it anti-clockwise.
Change language