You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
SECTION 2 - 2<br />
PAGE 1<br />
2 - 2 Needle position - Straight stitching and Zigzag stitching,<br />
maximum width<br />
Checking:<br />
1. Remove presser foot.<br />
2. Set machine at "straight stitching A" by turning selector dial.<br />
3. Turning hand wheel by hand, lower the needle and check if needle point<br />
comes to the center of needle plate hole.<br />
4. Set machine at "zigzag stitching C (maximum width)" by turning selector dial.<br />
5. Turning hand wheel by hand, move needle to right and left end, and check if<br />
each clearance between needle and needle hole end of needle plate is equal.<br />
Straight stitching A<br />
Zigzag stitching C<br />
(maximum width)<br />
Adjustment:<br />
1. Remove face cover.<br />
2. Loosen screw (1).<br />
3. Turning eccentric pin (2), adjust needle position.<br />
4. Tighten screw (1) after adjustment.