Users Manual SPA 1500.pdf - Jotron

Handbook page
27/94
COMMISSIONING PROCEDURE
FOR
SPA-1500 SYSTEM
Doc.No.: 96106-000-CP
1. CHECK THAT CABLING IS ACCORDING TO APPROVED DRAWINGS.
2. USE SPA-1501 AND 1593 UNIT TO ACCESS ZONE 1 TO 3 AND VERIFY AUDIO IN
THE CORRESPONDING SPEAKERS. ALSO VERIFY 24VDC VOLUME
OVERRIDE OUTPUT FOR ZONE 1-3(TERM.15/16,17/18,33/34) IF IN USE.
3. ACTIVATE ENTERTAINMENT IF INSTALLED AND VERIFY THAT IT’S
DISTRIBUTED TO THE SELECTED ZONE.(SWITCHES IN FRONT)
4. IF AN ALARMCARD IS INSTALLED TEST THAT BOTH ALARMS IS
DISTRIBUTED TO ALL ZONES AND CAN BE OVERRIDED BY THE
ACCESS PANEL(S) 1501 AND 1593. (USER1 TO USER 3 AND EXTERNAL INPUT)
CHECH PRIORITY AS FOLLOW:
• PRIO 1 = USER 1 (1501 OR 1593)
• PRIO 2 = USER 2
• PRIO 3 = USER 3
5. IF AN ALARMCARD OR DING-DONG CARD IS INSTALLED EACH
ANNOUNCEMENT COULD START WITH A PRETONE.
6. IF THE EXTERNAL INPUT IS IN USE, THEN CHECK THAT THE AUDIO
IS DISTRIBUTED TO THE PRESELECTED ZONES(DIPSWITCH S7 1-3)
7. IF EXTERNAL OUTPUT(AUDIO/KEY) IS IN USE, VERIFY AUDIO IS
PRESENT AT TERMINALS 100/101 REGARDLESS OF THE ZONE SELECTIONS.
KEY 1 AND 2 OUTPUT IS POTENSIAL FREE RELAY CONTACTS.
02 19.08.2009 REVISION, EM 1209 CD TBA CD
01 11.10.2006 CUSTOM REQUIRE TBA PA AHJ
0 05.02.02 CUSTOM REQUIRE AHJ TEH AHJ
Page 1 of 2
V:\prosjekt\96106 SPA-1500\DOC\96106-000-CP Commissioning procedure.doc
This document is the property of PHONTECH and must
not be copied or shown to a third person without our
written acceptance. In the interest of product
improvement, PHONTECH reserves the right to alter
specification and design without notice.
REV No: ISSUE DATE REASON FOR ISSUE PREPARED CHECKED APPROVED
TITLE: SPA 1500 system
COMMISSIONING PROCEDURE SIZE: A4 UED no:
DOC no: 96106-000-CP
FILE NAME:
96106-000-CP
Commissioning procedure.doc