User Manual - John Preston
User Manual - John Preston User Manual - John Preston
2.5 Selection of the parameter settings Indoor / Outdoor 29 Now you must choose the mode which you wish to change. Initially the mode in which you currently are will be shown. Outdoor Mode The following indicators apply: One bar display = Outdoor mode Two bars display = Indoor mode Indoor Mode To switch from Outdoor to Indoor mode, push the joystick upwards once – the second bar will appear. To switch from Indoor to Outdoor mode, push the joystick downwards once – the second bar will disappear.
30 2.6 Changing the parameters After you have established the mode which you wish to change, you can begin with the individual programming. By displacing the joystick to the left or right the various parameters described in chapter 2.3 may be set. The following apply: Displacement to the right: number code (1-15) is increased (change to the next highest parameter). Displacement to the left: number code (1-15) is decreased (change to the next lowest parameter). Displacement upwards: number of bars shown is increased; the currently selected parameter is increased or accepted.
- Page 1 and 2: Adventure A10 Informationen für Th
- Page 3 and 4: Contents 1 Mechanical adjustments
- Page 5 and 6: 1 Mechanical adjustments to the adv
- Page 7 and 8: 1.3 Armrest sideways adjustment 9 -
- Page 9 and 10: 1.5 Backrest angle of inclination a
- Page 11 and 12: 10 1.7 Seat length adjustment Funct
- Page 13 and 14: 12 1.9 Leg support length adjustmen
- Page 15 and 16: 14 1.11 Leg support footrest length
- Page 17 and 18: 16 1.13 Adjusting the chassis sprin
- Page 19 and 20: 18 31 1.14 Setting the direction in
- Page 21 and 22: 20 1.16 Setting the seat position S
- Page 23 and 24: 22 1.17.2 Mudguards for the powered
- Page 25 and 26: 2 Settings on the control unit 24 2
- Page 27 and 28: 26 Turning speed - Determines the m
- Page 29: 28 Speed reduction This parameter c
- Page 33 and 34: 32 2.8 Parameter table 2.8.1 advent
- Page 35 and 36: 34 2.8.3 adventure version 12 km/h
- Page 37 and 38: 36 Drive symbol flashes Exclamation
- Page 39 and 40: 38 Drive symbol flashes Exclamation
- Page 41 and 42: 40 Interface symbol flashes Exclama
- Page 43 and 44: 42 Complete seat unit* flashes Inte
- Page 45 and 46: 44 Brake symbol flashes Battery cap
30<br />
2.6 Changing the parameters<br />
After you have established the mode which you wish to<br />
change, you can begin with the individual programming.<br />
By displacing the joystick to the left or right the various<br />
parameters described in chapter 2.3 may be set.<br />
The following apply:<br />
Displacement to the right: number code (1-15) is increased<br />
(change to the next highest parameter).<br />
Displacement to the left: number code (1-15) is decreased<br />
(change to the next lowest parameter).<br />
Displacement upwards: number of bars shown is increased;<br />
the currently selected parameter is increased or accepted.