Operating Manual - John Morris Scientific
Operating Manual - John Morris Scientific
Operating Manual - John Morris Scientific
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Menu functions<br />
6.9. Setting the pump pressure<br />
Examples:<br />
Adjusted<br />
Effective<br />
The pressure of the circulating pump is adjustable in four grades. After<br />
setting, the VFD-Info-Display indicates the corresponding value.<br />
Adjustable pump capacity stage 1 ... 4<br />
Illuminated display:<br />
for pump pressure<br />
Display for the adjusted pump pressure stage in the –OFF- mode.<br />
Display for the effective pump pressure stage (rotation speed) after start.<br />
For protecting the pump motor, the rotation speed changes with the load<br />
applied, for example depending on the viscosity of the bath fluid at different<br />
working temperatures.<br />
Flow rate:<br />
22 ... 26 l/min<br />
Pump capacity stage 1 2 3 4<br />
Pump pressure: [bar] 0,4 0,5 0,6 0,7<br />
Suction pump [bar] 0,2 0,26 0,33 0,4<br />
Total capacity [bar] 0,6 0,76 0,93 1,1<br />
in a loop circuit<br />
Limits<br />
Interface serial<br />
ATCalibration<br />
>Pump<br />
ESC<br />
ESC<br />
Pump<br />
>Pump level: 1 /2/3/4<br />
1. Use the keys to select the menu item.<br />
2. With the keys select the parameter (parameter blinks).<br />
3. Press enter to store the new parameter or value.<br />
62