Operating Manual - John Morris Scientific

Menu functions
>Edit Profile: 1
Step: 3
Setp: 50.00°C
Time [hh:mm] 00:02
Example:
>Delete Prof. 4
from Step
to Step
8
34
delete
yes
>Delete Prof.
from Step
4
8
to Step 34
****** delete ******
Display sections (Step):
1 Use the keys to select the submenu „Step“, enter the
desired number
and press enter
or
2 If the submenu „Step“ is selected, section by section can be shown
in ascending order by the key .
Each previously set value is displayed.
Delete:
A flashing segment indicates that the respective profile number
needs to be entered in which one or more consecutive sections are
to be deleted.
Example:
Delete step 8 to step 34 in profile 4.
Line 4 indicates the deletion.
yes
Example:
>Print Profile 2
Print
yes
>Print Profile 2
****** print *******
Print:
Each profile may be printed via the serial interface for control or
documentation.
A flashing segment indicates that the number of the profile to be
printed needs to be entered.
Example: Print profile 2
yes
Printing is indicated in line 2.
>hour.min 14:24
Day.Mon 07.12
Year 2003
14:24:36
Setting clock
The integrated clock allows starting a profile at any date and time.
The clock is preset in the factory.
Lines 1 to 3:
Check for correctness of the preset date and time and correct if
necessary.
The time is diplayed permanently in line 4.
48