819 Injection Module User's Guide (PDF) - John Morris Scientific
819 Injection Module User's Guide (PDF) - John Morris Scientific
819 Injection Module User's Guide (PDF) - John Morris Scientific
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Installation 2<br />
3 Place the Z-height adjustment tool on one of its<br />
ends near the center of the locator plate (if<br />
necessary, remove any racks or accessories<br />
before doing this).<br />
Adjusting the 215’s Z-Arm Height<br />
4 Loosen the mounting screw on the Z-arm<br />
mounting bracket and slightly raise the Z-arm.<br />
5 Manually move the arm so the Z-arm is<br />
centered over the Z-height adjustment tool.<br />
6 While holding Z-height adjustment tool flat<br />
against the locator plate, use the other hand to<br />
lower the Z-arm until it lightly rests on the<br />
adjustment tool.<br />
7 Tighten the mounting screw on the Z-arm<br />
mounting bracket so the Z-arm is secure.<br />
8 While holding the adjustment tool in place,<br />
slide the Z-arm off the tool. Ensure that the<br />
bottom of the Z-arm lightly rubs against the<br />
adjustment tool as it moves. Repeat steps 4<br />
through 7 until this is true.<br />
9 Store the Z-height adjustment tool.<br />
2-13
Change language