819 Injection Module User's Guide (PDF) - John Morris Scientific

More documents

Recommendations

Info

Installation 2 Making Electrical Connections Unit ID Selection At the factory, Gilson set the unit ID to 29. The unit ID identifies the 819 Injection Module to Gilson software packages that can issue GSIOC commands to Gilson devices. There is no need to change the unit ID unless it is the same as that assigned to another Gilson device connected along the GSIOC. To change the unit ID: 1 Gently insert a small flat blade screwdriver into the Unit ID selector on the rear panel and turn it. 2 Align the white dot with one of the indicated numbers. The unit ID is 20 plus the selected number. 2-8
Installation 2 Fuse Installation To install the fuses in the 819 Injection Module: 1 Locate the accessory package containing the fuse drawer appropriate for your line voltage. Discard the other fuse drawer. 2 Locate the accessory package containing the fuses. 3 Install the fuse(s) into the fuse drawer. The fuse drawer for 100/120V accepts one fuse. The fuse drawer for 220/240V accepts two fuses. 4 Insert the fuse drawer into its receptacle in the module. Fuse installation for 100/120 voltage Making Electrical Connections Fuse installation for 220/240 voltage 2-9
Page 1: 819 Injection Module User’s Guide
Page 4 and 5: 5 Troubleshooting Electrical ......
Page 7: Declaration of Conformity Applicati
Page 10 and 11: Introduction 1 Unpacking Unpacking
Page 12 and 13: Introduction 1 Technical Specificat
Page 14 and 15: Introduction 1 Technical Specificat
Page 16 and 17: Installation 2 Installing the Injec
Page 18 and 19: Installation 2 Making Electrical Co
Page 26 and 27: Installation 2 Adjusting the 215’
Page 28 and 29: Installation 2 Adjusting the Liquid
Page 34 and 35: Operation 3 Front Panel Front Panel
Page 37 and 38: Maintenance 4 To obtain optimum per
Page 39 and 40: Maintenance 4 Replacing Parts Repla
Page 41 and 42: Maintenance 4 Replacing the Injecti
Page 43 and 44: Maintenance 4 Replacing a Fuse A bl
Page 45 and 46: Troubleshooting 5 5-1
Page 47 and 48: Troubleshooting 5 Unit Not Operatio
Page 49 and 50: Troubleshooting 5 Repair and Return
Page 51 and 52: Replacement Parts and Accessories A
Page 53 and 54: Appendix A 251773 Prep FC package (
Page 55: Appendix A 49942107 0.8 mm ID Teflo
Page 58 and 59: Appendix B GSIOC Commands GSIOC Com
Page 61 and 62: Baud Rate C As a default, the baud
Page 63 and 64: Specifications Methods D This appen
Page 65 and 66: Appendix D Mobile Phase/Rinse Solve
Page 67 and 68: Appendix D Injection Reproducibilit
Page 69 and 70: Using an Additional 819 Module for
Page 71 and 72: Appendix E Electrical Connections M
Page 73 and 74:
Appendix E Using an Additional 819
Page 75:
Appendix E Example UniPoint Method
show all

819 Injection Module User's Guide (PDF) - John Morris Scientific

Create successful ePaper yourself

Delete template?

Save as template?