819 Injection Module User's Guide (PDF) - John Morris Scientific

More documents

Recommendations

Info

Installation 2 Making Electrical Connections Making Electrical Connections Rear Panel 1 Gilson Serial Input/Output Channel (GSIOC) port 2 Unit ID selector 3 Input/Output (I/O) port 4 Fuse drawer 5 Power switch 6 Power receptacle 2-4
Installation 2 GSIOC Port Use the GSIOC port to connect the injection module to the 215 Liquid Handler. This enables the module to be controlled via a program running on the keypad or computer connected to the liquid handler. 1 Locate the GSIOC cable in the accessory package. 2 Connect one of the female connectors to the GSIOC port of the injection module. Tighten the retaining screws. Making Electrical Connections 3 Connect the other female connector to the GSIOC port of the 215 Liquid Handler. Note: If the liquid handler and the injection module are part of a Gilson HPLC system, use the male connector to connect additional devices along the GSIOC. 2-5
Page 1: 819 Injection Module User’s Guide
Page 4 and 5: 5 Troubleshooting Electrical ......
Page 7: Declaration of Conformity Applicati
Page 10 and 11: Introduction 1 Unpacking Unpacking
Page 12 and 13: Introduction 1 Technical Specificat
Page 14 and 15: Introduction 1 Technical Specificat
Page 16 and 17: Installation 2 Installing the Injec
Page 20 and 21: Installation 2 Making Electrical Co
Page 26 and 27: Installation 2 Adjusting the 215’
Page 28 and 29: Installation 2 Adjusting the Liquid
Page 34 and 35: Operation 3 Front Panel Front Panel
Page 37 and 38: Maintenance 4 To obtain optimum per
Page 39 and 40: Maintenance 4 Replacing Parts Repla
Page 41 and 42: Maintenance 4 Replacing the Injecti
Page 43 and 44: Maintenance 4 Replacing a Fuse A bl
Page 45 and 46: Troubleshooting 5 5-1
Page 47 and 48: Troubleshooting 5 Unit Not Operatio
Page 49 and 50: Troubleshooting 5 Repair and Return
Page 51 and 52: Replacement Parts and Accessories A
Page 53 and 54: Appendix A 251773 Prep FC package (
Page 55: Appendix A 49942107 0.8 mm ID Teflo
Page 58 and 59: Appendix B GSIOC Commands GSIOC Com
Page 61 and 62: Baud Rate C As a default, the baud
Page 63 and 64: Specifications Methods D This appen
Page 65 and 66: Appendix D Mobile Phase/Rinse Solve
Page 67 and 68: Appendix D Injection Reproducibilit
Page 69 and 70:
Using an Additional 819 Module for
Page 71 and 72:
Appendix E Electrical Connections M
Page 73 and 74:
Appendix E Using an Additional 819
Page 75:
Appendix E Example UniPoint Method
show all

819 Injection Module User's Guide (PDF) - John Morris Scientific

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?