819 Injection Module User's Guide (PDF) - John Morris Scientific
819 Injection Module User's Guide (PDF) - John Morris Scientific
819 Injection Module User's Guide (PDF) - John Morris Scientific
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Introduction 1<br />
Unpacking<br />
Unpacking<br />
The injection module is delivered with all major<br />
components already assembled. Keep the original<br />
container and packing material in case it must be<br />
returned to the factory.<br />
The injection module and accessories are shipped in<br />
one container. Unpack the container and inspect for<br />
damage. Promptly report any damage to the carrier.<br />
Some carriers must receive concealed damage claims<br />
within seven days of delivery.<br />
After unpacking the injection module and its<br />
accessories, ensure you have the following:<br />
• <strong>819</strong> <strong>Injection</strong> <strong>Module</strong> with installed Rheodyne<br />
valve, injection loop, stainless steel waste<br />
tubing, injection port, and calibrated tubing<br />
• power cords<br />
• fuse drawers and fuses<br />
• Z-height adjustment tool<br />
• GSIOC cable<br />
• 5/16"–1/4" wrench<br />
• two 10 mm wrenches<br />
• terminal block connector<br />
• replacement fuse<br />
• two knurled screws<br />
• Tygon drain tubing<br />
1-2