NAV4 Plus User Guide Issue 2 - ICS Electronics Limited
NAV4 Plus User Guide Issue 2 - ICS Electronics Limited
NAV4 Plus User Guide Issue 2 - ICS Electronics Limited
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>NAV4</strong>plus <strong>User</strong> <strong>Guide</strong><br />
INSTALLATION: ANT4w NAVTEX ANTENNA<br />
The ANT4w NAVTEX antenna should be mounted<br />
clear of metal rigging and at least 0.5 metres from<br />
other antennas. Ensure that it cannot be snagged<br />
by mooring warps, running rigging or engulfed by<br />
green water. It should be mounted so that the<br />
antenna is pointing upwards with the connecting<br />
lead exiting from the bottom.<br />
ANT4w<br />
The ANT4w passive NAVTEX antenna will mount on a standard 1” x<br />
14 T.P.I. marine GPS/VHF antenna base or pole fitting, these are<br />
available from marine supply shops. The optional ANT-CLAMP is<br />
recommended if you intend to mount the ANT4w antenna directly<br />
onto a 25mm stainless steel rail.<br />
NO-GO cone – keep this area clear of obstructions<br />
500mm<br />
500mm<br />
Side pin to (2)<br />
on <strong>NAV4</strong>plus<br />
Centre pin to (1)<br />
on <strong>NAV4</strong>plus<br />
28