NAV4 Plus User Guide Issue 2 - ICS Electronics Limited
NAV4 Plus User Guide Issue 2 - ICS Electronics Limited NAV4 Plus User Guide Issue 2 - ICS Electronics Limited
NAV4plus User Guide 490kHz set-up 1. You now get a print out of the current settings for the selected frequency. To accept, press the Y button. To change any part of the settings, press the N button. 2. If the N button was pressed then each item comes up in turn for acceptance or rejection as follows : 3. Station Selection. The present setting is printed, press the Y button to accept or the N button to change. If N then one or more stations may be selected, there are 26 options, one for each letter of the alphabet. 26 key presses have to be made, pressing N for every station that you wish to reject and Y for every station from which you wish to receive NAVTEX. Button 1 2 3 4 5 6 7 8 9 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 2 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 Push Station A B C D E F G H I J K L M N O P Q R S T U V W X Y Z Y/N For example, for just station S, N would be pressed 18 times, Y once and then 7 more N ‘s. STATIONS:--------------------S------- (Example) 4. Message Categories. The present setting is printed, press the Y button to accept or the N button to change. If N then one or more message categories may be selected, there are 26 options, one for each letter of the alphabet. 26 key presses have to be made, pressing N for every message category that you wish to reject and Y for every message category which you wish to print. Button 1 2 3 4 5 6 7 8 9 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 2 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 Push Category A B C D E F G H I J K L M N O P Q R S T U V W X Y Z Y/N 14
NAV4plus User Guide CATEGORIES:A-CD-----KLM-------------- (Example) 5. Log Interval. The present setting is printed, press the Y button to accept or the N button to change. Options are Off, 15mins, 30 mins, 1 hour, 3 hours, 6 hours or 12 hours. Accept Y or reject N each option in turn. Upon acceptance your selection will be printed. 6. Waypoint Printing. The present setting is printed, press the Y button to accept or the N button to change. Before selecting, ensure that your GPS fully supports the printing of waypoints. 7. Clear Message Log. Press the Y button to clear the list of previously printed messages or the N button to maintain it. If you press the Y button, the NAV4plus will now be ready to print messages with the same identifier & serial number log before the 72 hour message timeout period has passed. All of the programmed settings are now printed for the selected frequency. If the other frequency has to be re-programmed this sequence has to be repeated, starting at 1. above. TEARING OFF A PRINT-OUT Use a gentle up or downward and sideways motion to tear the paper at the exit point of the NAV4plus case. DO NOT PULL THE PAPER THROUGH THE PRINTER AS THIS ACTION WILL DAMAGE THE PRINTER MECHANISM Always use the F button to feed the paper clear of the mechanism. 15
- Page 1 and 2: Nav4plus User Guide January 2002 MA
- Page 3 and 4: NAV4plus User Guide Contents QUICK
- Page 5 and 6: NAV4plus User Guide QUICK START - G
- Page 7 and 8: NAV4plus User Guide What Can My Nav
- Page 9 and 10: NAV4plus User Guide HOW TO OPERATE
- Page 11 and 12: NAV4plus User Guide INITIAL OPERATI
- Page 13: NAV4plus User Guide For example, fo
- Page 17 and 18: NAV4plus User Guide Stainless Steel
- Page 19 and 20: NAV4plus User Guide • WATER refer
- Page 21 and 22: NAV4plus User Guide ALARMS The alar
- Page 23 and 24: NAV4plus User Guide Electrical Inst
- Page 25 and 26: NAV4plus User Guide NMEA CONNECTION
- Page 27 and 28: NAV4plus User Guide ANTENNA INSTALL
- Page 29 and 30: NAV4plus User Guide • Mount the a
- Page 31 and 32: NAV4plus User Guide MAINTENANCE AND
- Page 33 and 34: NAV4plus User Guide Printer Jam J M
- Page 35 and 36: NAV4plus User Guide PACKING LIST AN
- Page 37 and 38: NAV4plus User Guide APPENDIX I : NA
- Page 39 and 40: NAV4plus User Guide Remote Switch A
- Page 41 and 42: NAV4plus User Guide APPENDIX III :
- Page 43 and 44: NAV4plus User Guide Id Area Country
- Page 45 and 46: NAV4plus User Guide APPENDIX IV : M
<strong>NAV4</strong>plus <strong>User</strong> <strong>Guide</strong><br />
CATEGORIES:A-CD-----KLM--------------<br />
(Example)<br />
5. Log Interval. The present setting is printed, press the Y button<br />
to accept or the N button to change. Options are Off, 15mins,<br />
30 mins, 1 hour, 3 hours, 6 hours or 12 hours. Accept Y or<br />
reject N each option in turn. Upon acceptance your selection<br />
will be printed.<br />
6. Waypoint Printing. The present setting is printed, press the Y<br />
button to accept or the N button to change. Before selecting,<br />
ensure that your GPS fully supports the printing of waypoints.<br />
7. Clear Message Log. Press the Y button to clear the list of<br />
previously printed messages or the N button to maintain it. If<br />
you press the Y button, the <strong>NAV4</strong>plus will now be ready to print<br />
messages with the same identifier & serial number log before the<br />
72 hour message timeout period has passed.<br />
All of the programmed settings are now printed for the selected<br />
frequency. If the other frequency has to be re-programmed this<br />
sequence has to be repeated, starting at 1. above.<br />
TEARING OFF A PRINT-OUT<br />
Use a gentle up or downward and sideways motion to tear the paper<br />
at the exit point of the <strong>NAV4</strong>plus case.<br />
DO NOT PULL THE PAPER THROUGH THE PRINTER AS THIS<br />
ACTION WILL DAMAGE THE PRINTER MECHANISM<br />
Always use the F button to feed the paper clear of the mechanism.<br />
15