NAV4 Plus User Guide Issue 2 - ICS Electronics Limited

NAV4plus User Guide
490kHz set-up
1. You now get a print out of the current settings for the selected
frequency. To accept, press the Y button. To change any part
of the settings, press the N button.
2. If the N button was pressed then each item comes up in turn
for acceptance or rejection as follows :
3. Station Selection. The present setting is printed, press the Y
button to accept or the N button to change. If N then one or
more stations may be selected, there are 26 options, one for
each letter of the alphabet. 26 key presses have to be made,
pressing N for every station that you wish to reject and Y for
every station from which you wish to receive NAVTEX.
Button 1 2 3 4 5 6 7 8 9 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 2
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6
Push
Station A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
Y/N
For example, for just station S, N would be pressed 18 times,
Y once and then 7 more N ‘s.
STATIONS:--------------------S-------
(Example)
4. Message Categories. The present setting is printed, press the
Y button to accept or the N button to change. If N then one or
more message categories may be selected, there are 26
options, one for each letter of the alphabet. 26 key presses have
to be made, pressing N for every message category that you
wish to reject and Y for every message category which you
wish to print.
Button 1 2 3 4 5 6 7 8 9 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 2
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6
Push
Category
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
Y/N
14