NAV4 Plus User Guide Issue 2 - ICS Electronics Limited

NAV4plus User Guide
For example, for just station S, N would be pressed 18 times,
Y once and then 7 more N ‘s.
STATIONS:--------------------S-------
(Example)
5. Message Categories. The present setting is printed, press the
Y button to accept or the N button to change. If N then one or
more message categories may be selected, there are 26
options, one for each letter of the alphabet. 26 key presses have
to be made, pressing N for every message category that you
wish to reject and Y for every message category which you
wish to print.
Button
1 2 3 4 5 6 7 8 9 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 2
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6
Push
Category
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
Y/N
CATEGORIES: A-CD------KLM------------
(Example)
6. Log Interval. The present setting is printed, press the Y button
to accept or the N button to change. Options are Off, 15mins,
30 mins, 1 hour, 3 hours, 6 hours or 12 hours. Accept Y or
reject N each option in turn. Upon acceptance your selection
will be printed.
7. Waypoint Printing. The present setting is printed, press the Y
button to accept or the N button to change. Before selecting,
ensure that your GPS fully supports the printing of waypoints.
8. Clear Message Log. Press the Y button to clear the list of
previously printed messages or the N button to maintain it. If
you press the Y button, the NAV4plus will now be ready to print
messages with the same identifier & serial number log before the
72 hour message timeout period has passed.
13