Installation Instructions Product-Ident: 47169 - Jehnert Sound Design
Installation Instructions Product-Ident: 47169 - Jehnert Sound Design
Installation Instructions Product-Ident: 47169 - Jehnert Sound Design
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
30.11.09 09:05<br />
<strong>Installation</strong> <strong>Instructions</strong> <strong>Product</strong>-<strong>Ident</strong>: <strong>47169</strong><br />
4 Handling of door card<br />
4.1 Use the doorboard as template in order to mark fastening points and cut-outs:<br />
Precisely align the doorboard to the fixing points of the door card.<br />
5 Marking fastening points<br />
5.1 Marking of fastening points 1+2 - premounted in the doorboard:<br />
Pressing the panel to the door card makes the screw points visible.<br />
5.2 Marking of the angular fastening point 3:<br />
Put in a piece of packing tape to this position. Measure up the angular position. Mark panel edge and angular position on the tape.<br />
5.3 Marking of the pre-drilled M4-fastening points 4+5:<br />
Use a thin awl to set the marks on the door card.<br />
Example<br />
Seite 5 von 10