Installation Instructions Product-Ident: 47169 - Jehnert Sound Design
Installation Instructions Product-Ident: 47169 - Jehnert Sound Design
Installation Instructions Product-Ident: 47169 - Jehnert Sound Design
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
30.11.09 09:05<br />
<strong>Installation</strong> <strong>Instructions</strong> <strong>Product</strong>-<strong>Ident</strong>: <strong>47169</strong><br />
1 Disassembly of the door card<br />
1.1 Roll down window completely.<br />
1.2 Carefully pry off the round grill behind the door latch lever and remove the screw underneath(A).<br />
1.3 Pry off the cover grill of the door lock (forward away).<br />
1.4 Pry out the cover of the door handle and remove the 3 screws underneath (B1 + B2) .<br />
1.5 Pry out the module of the window winder and disconnet the switch.<br />
1.6 Lift the door card out of the sealing above and simultaneously move it horizontally and forward away from the inner door metal.<br />
1.7 Remove the Bowden pull wire of the door latch lever.<br />
1.8 Disconnect the original loudspeaker plugs and dismount the original speaker.<br />
Seite 2 von 10
Change language