Installation Instructions - Jegs

More documents

Recommendations

Info

HyperPAC User Manual Welcome to the HyperPAC experience. The system has detected that this is your first time using your HyperPAC. Before getting started you will be taken through some setup screens where you will need to enter your Vehicle and Owner information. This setup is only required the first time you use your HyperPAC and you will not be required to perform this setup for future use. If you should need to change any of this information in the future you may do so by entering the "Vehicle / Owner Information" from the MAIN MENU. Press "Next" to continue. NEXT WARNING: Obey all laws when using the HyperPac TM Performance Automotive Computer. Use the HyperPac TM with caution and an emphasis on safety. Do not operate the HyperPac TM while driving. Do not take your eyes off the road. Operating By touching the HyperPac ACCEPT TM while you driving agree can that lead you to have a fatal read or serious accident. the HYPERpac owner's manual and will obey all traffic The HyperPac TM is not intended for street use when in the Drag Strip laws or while Dynamometer using the operating HYPERpac. modes. When in these modes, use only in designated areas, closed courses, drag-strips, or racetracks. I When making Drag Strip or Dynamometer runs, always perform the run setup procedures while the vehicle is not in motion. By touching ACCEPT you agree to have read and TM understand the HyperPAC user manual. DECLINE ACCEPT The first step is to properly align the touch screen. Paying close attention, touch the center of the target. Once the touch screen has been properly aligned the unit will display “Touch Screen Setup Complete.” www.hypertech.com • (901) 382-8888 Page 8 of 66
HyperPAC User Manual Touch Screen Alignment 1 The first step is to properly align your touch screen. Touch the center of the target as it moves to different locations on the screen. Once the touch screen is properly aligned the screen will read: "Touch screen setup complete" Align Touch Screen Touch Screen Alignment 2 Touch the center of the target. TAP ME Touch Screen Alignment Complete Touch Screen Setup Complete www.hypertech.com • (901) 382-8888 Page 9 of 66
Page 1 and 2: HyperPAC User Manual User Manual We
Page 3 and 4: HyperPAC User Manual Installing the
Page 5 and 6: HyperPAC User Manual Installing the
Page 7: HyperPAC User Manual Getting Starte
Page 11 and 12: HyperPAC User Manual Use the up and
Page 13 and 14: HyperPAC User Manual Select the uni
Page 15 and 16: HyperPAC User Manual For the HyperP
Page 17 and 18: HyperPAC User Manual First, use the
Page 19 and 20: HyperPAC User Manual Vehicle Inform
Page 21 and 22: HyperPAC User Manual Current Settin
Page 23 and 24: HyperPAC User Manual ADJUST RPM REV
Page 25 and 26: CORRECT FOR NON-STOCK TIRES AND GEA
Page 27 and 28: ADJUST VEHICLE TOP SPEED LIMITER Ve
Page 29 and 30: HyperPAC User Manual RETURNING THE
Page 31 and 32: HyperPAC User Manual Creating New T
Page 33 and 34: HyperPAC User Manual RUN SETUP Scre
Page 35 and 36: HyperPAC User Manual Staging the ve
Page 37 and 38: HyperPAC User Manual Drag Strip Tes
Page 39 and 40: HyperPAC User Manual The DRIVE WHEE
Page 41 and 42: HyperPAC User Manual Viewing Saved
Page 43 and 44: HyperPAC User Manual View each of t
Page 45 and 46: HyperPAC User Manual To recalibrate
Page 47 and 48: HyperPAC User Manual 11. If the dat
Page 49 and 50: HyperPAC User Manual DYNAMOMETER PR
Page 51 and 52: HyperPAC User Manual RUN SETUP The
Page 53 and 54: HyperPAC User Manual Dyno Test Comp
Page 55 and 56: HyperPAC User Manual Data Acquisiti
Page 57 and 58: HyperPAC User Manual Session Notes
Page 59 and 60:
ENGINE MONITOR PROGRAM HyperPAC Use
Page 61 and 62:
HyperPAC User Manual ANALOG GAUGES
Page 63 and 64:
HyperPAC User Manual DIAGNOSTICS PR
Page 65 and 66:
HyperPAC User Manual What To Do Bef
show all

Installation Instructions - Jegs

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?