Installation Instructions - Jegs
Installation Instructions - Jegs
Installation Instructions - Jegs
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
HyperPAC User Manual<br />
If the HyperPAC detects any codes the following screen will be shown.<br />
Diagnostics View Current Codes<br />
Diagnostic Trouble Codes (DTCs)<br />
1 of 3 trouble codes found :<br />
P0128<br />
The engine coolant has not met the minimum<br />
thermostat regulating temperature within the<br />
expected amount of time.<br />
Diagnostics Clear ALL DTCs<br />
Touch NEXT to view next DTC.<br />
Touch CLEAR to clear ALL DTCs.<br />
NOTE: All DTCs will be cleared.<br />
Write down codes for future reference.<br />
Touch CLEAR to continue,<br />
or touch BACK to view DTCs.<br />
BACK<br />
MAIN<br />
MENU<br />
HELP<br />
CLEAR<br />
NEXT<br />
CODE<br />
BACK<br />
MAIN<br />
MENU<br />
HELP<br />
CLEAR<br />
If multiple codes are found, the display will show 1 of x trouble codes found. Touch<br />
NEXT CODE to see the other codes. Touch CLEAR to clear all of the DTCs. The<br />
clearing process will not allow you to clear individual codes. This is a limitation of the<br />
vehicle’s computer, not the HyperPAC. It’s always a good idea to write down the<br />
codes and their information for future reference. The screen will notify you that all of the<br />
codes are about to be cleared, touch BACK if you wish to keep the codes without<br />
clearing them.<br />
www.hypertech.com • (901) 382-8888 Page 64 of 66