Installation Instructions - Jegs
Installation Instructions - Jegs
Installation Instructions - Jegs
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
HyperPAC User Manual<br />
MAKING A RUN<br />
Before making a run the DYNO READY SCREEN will display important engine<br />
operating conditions and a large tachometer. To start gathering data, touch START<br />
DYNO. The HyperPAC will record data until you touch the STOP DYNO button or<br />
until the time limit for a run has been reached.<br />
Dyno Ready Session 10/11/04_1 run # x<br />
Engine Monitor<br />
MPH<br />
Gear<br />
Knock<br />
Spark<br />
AFR<br />
Tachometer<br />
RPM<br />
Coolant<br />
Intake air<br />
BACK<br />
End<br />
Session<br />
HELP<br />
RUN<br />
NOTES<br />
START<br />
DYNO<br />
Test in Process<br />
After starting a Dyno run the START DYNO button becomes STOP DYNO.<br />
Touch STOP DYNO to end the run stop collecting data.<br />
Dyno Test In Process Session 10/11/04_1 run # x<br />
Engine Monitor<br />
MPH<br />
Gear<br />
Knock<br />
Spark<br />
AFR<br />
Tachometer<br />
RPM<br />
Coolant<br />
Intake air<br />
STOP<br />
DYNO<br />
After touching STOP DYNO the results will be displayed after the vehicle has come to a<br />
complete stop.<br />
www.hypertech.com • (901) 382-8888 Page 52 of 66