Installation Instructions - Jegs

HyperPAC User Manual
Installing the HyperPAC
Included with the HyperPAC is a
suction cup mount base (fig F). Locate a
position on the windshield to mount the
HyperPAC that will not obstruct the
driver’s view. Suggested mounting
locations are in the center of the
windshield (fig G), or on the far left of the
driver, near the A-pillar (fig H).
Figure F
Figure G
Figure H
www.hypertech.com • (901) 382-8888 Page 4 of 66