Installation Instructions - Jegs

HyperPAC User Manual
Installing the HyperPAC
You should find included with the
HyperPAC a clamp, plastic spacer, and 4
screws (fig. A). Several holes are provided to
allow adjustment for the mounting location
(fig. B). With the HyperPAC laying face
down, align the plastic spacer to the holes on
the back of the unit (fig C). Place the clamp
on top of the plastic spacer, with the lift tab
pointed to the left or right of the HyperPAC
screen (fig D), and align it with the holes in
the spacer. Insert the screws provided and
tighten (fig E).
Figure A
Figure B
Figure C
Figure E
Figure D
www.hypertech.com • (901) 382-8888 Page 3 of 66