Installation Instructions - Jegs
Installation Instructions - Jegs
Installation Instructions - Jegs
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
HyperPAC User Manual<br />
RETURNING THE VEHICLE TO THE STOCK PROGRAM<br />
Performance Tuning Main<br />
Select options below to make changes.<br />
Touch CURRENT SETTINGS to view current settings. Touch<br />
VIEW CHANGES when all selections have been made to enter<br />
the programming mode.<br />
Select Engine<br />
Power Tuning<br />
Adjust RPM<br />
Rev Limiter<br />
Adjust<br />
Electric<br />
Cooling Fans<br />
Adjust<br />
Transmission<br />
Settings<br />
Correct for<br />
Non-Stock<br />
Tires/Gears<br />
Adjust<br />
Vehicle Top<br />
Speed Limiter<br />
Return All<br />
Settings to<br />
Stock<br />
BACK<br />
MAIN<br />
MENU<br />
HELP<br />
Current<br />
Settings<br />
View<br />
Changes<br />
From the Performance Tuning’s Main Menu, touch RETURN ALL SETTINGS TO<br />
STOCK.<br />
NOTE: All of the performance tuning features will be reset to the original stock program.<br />
Return ALL Performance Settings to Stock<br />
Touch START PROGRAMMING to reprogram all of<br />
your settings to stock, or touch BACK to return to<br />
the Performance Tuning Selections.<br />
BACK<br />
MAIN<br />
MENU<br />
HELP<br />
START<br />
PROGRAMMING<br />
The HyperPAC will lead you through some simple instructions screens requiring you<br />
to cycle the ignition on and off, simply follow the instructions on the screen. These<br />
Instruction screens may vary depending upon Year, Make, & Model and are not shown<br />
in this manual.<br />
NOTE: The programming process takes approximately 5 minutes.<br />
The vehicle’s engine cannot be running during the programming process.<br />
www.hypertech.com • (901) 382-8888 Page 29 of 66
Change language