Installation Instructions - Jegs
Installation Instructions - Jegs
Installation Instructions - Jegs
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
HyperPAC User Manual<br />
After you enter the User Name the HyperPAC will request information from the<br />
vehicle’s computer. The screen will display “Please Wait” while the screen is receiving<br />
information.<br />
After the vehicle information is verified the unit is ready to be locked to the vehicle<br />
before allowing normal operation.<br />
IMPORTANT - The HyperPAC can only be used on the vehicle that it is locked to.<br />
Once the unit has been locked to a vehicle it must be sent back to the factory to be<br />
unlocked before it can be connected to another vehicle.<br />
Touch CONTINUE to lock the unit to the vehicle.<br />
Touch CANCEL if you are not connected to the vehicle that you wish to install the<br />
HyperPAC unit on.<br />
Lock to Vehicle<br />
The HYPERpac is now ready to lock itself to<br />
this vehicle.<br />
VIN = 1FTPX14534NA97693<br />
2004 Ford Truck F-150 4x2 5.4L triton -3 Valve<br />
Calibration ID = RXAQ3G4.HEX<br />
Doing this will allow all HYPERpac features to be<br />
made available. This will permanently tie the<br />
HYPERpac unit to this specific vehicle.<br />
Touch CONTINUE to lock to this vehicle or<br />
CANCEL to abort this process.<br />
CANCEL<br />
HELP<br />
CONTINUE<br />
www.hypertech.com • (901) 382-8888 Page 12 of 66
Change language