Airaid 400-528 Throttle Body Spacer Installation Instructions - Jegs
Airaid 400-528 Throttle Body Spacer Installation Instructions - Jegs
Airaid 400-528 Throttle Body Spacer Installation Instructions - Jegs
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
# <strong>400</strong>-<strong>528</strong> INSTALLATION INSTRUCTIONS<br />
91-95 Ford F-250/350 7.5L<br />
Thank you for purchasing the PowerAid <strong>Throttle</strong> <strong>Body</strong> <strong>Spacer</strong>. Please read the<br />
instruction manual carefully before proceeding with the installation. Contact AIRAID @<br />
(800) 498-6951 8:00 AM - 5:00 PM MST Weekdays for questions regarding fit or instructions<br />
that are not clear to you. Your PowerAid <strong>Throttle</strong> <strong>Body</strong> <strong>Spacer</strong> was carefully<br />
inspected and packaged. Check that no parts are missing, or were damaged during<br />
shipping. If any parts are missing, please contact AIRAID.<br />
Thank you for selecting AIRAID.<br />
Parts List<br />
(1) Power Plate<br />
(2) Gaskets<br />
(2) Linkage Plates<br />
(4) 5/16-18 x 2 1/2” Bolts<br />
(2) 5/16-18 x 3/4” Flat Head Screws<br />
(4) 5/16” Washers<br />
Tools List<br />
1/2” Socket<br />
3/16” Hex Key<br />
Standard Screwdriver<br />
1
<strong>Installation</strong> <strong>Instructions</strong>. Read Me!<br />
1. DISCONNECT NEGATIVE (-) BATTERY CABLE.<br />
2. Remove throttle body intake assembly.<br />
3. Remove (2) bolts & save from linkage bracket. (Ref. C)<br />
4. Remove (4) bolts from the throttle body. (Ref. D)<br />
5. Remove gasket and clean surfaces.<br />
6. Install power plate using (2) gaskets. (Ref. A)<br />
A. Place one gasket between the throttle body and power plate.<br />
B. Place second gasket between the power plate and manifold.<br />
7. Replace (4) bolts using Step 4 as an example.<br />
8. Locate and install (2) linkage plates using (2) flat head screws. (Ref. C)<br />
9. Reinstall linkage bracket using saved bolts. Refer to Step 3<br />
10. Inspect & Test the throttle linkage for full open & closed travel before driving. Some cruise or kickdown cables<br />
may require adjustment. Please refer to your vehicles service manual for proper adjustment.<br />
11. Reinstall throttle body intake assembly using Step 2 as an example.<br />
12. Reconnect battery cable. Enjoy!<br />
The sound of power...The “whistle” means its working!<br />
Ref. C- (2) Linkage Plates<br />
(2) Flat Head Screws<br />
Ref. A- (1) Power Plate<br />
(2) Gaskets<br />
Ref. D- (4) 5/16-18” x 2 1/2” Bolts<br />
(4) 5/16” Washers<br />
Ref. B– <strong>Throttle</strong> <strong>Body</strong><br />
AIRAID Filter Co. 2688 E Rose Garden Ln. Phoenix AZ 85050 (800) 498-6951 <strong>Airaid</strong>info@airaid.com www.airaid.com<br />
2<br />
Rev. 12/04/06
Change language