Edelbrock 70055 Nitrous System Installation Instructions - Jegs
Edelbrock 70055 Nitrous System Installation Instructions - Jegs
Edelbrock 70055 Nitrous System Installation Instructions - Jegs
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Caution!!!<br />
Before You Install Your <strong>Edelbrock</strong> <strong>Nitrous</strong> <strong>System</strong>…<br />
Please read this <strong>Installation</strong> manual fully before installing this system.<br />
You will need to have available the following tools:<br />
Hand Tools<br />
❑ Socket set including ratchets and extensions<br />
❑ Screwdrivers<br />
❑ Pliers<br />
❑ Bench vise<br />
❑ Wire crimping pliers, wire strippers<br />
❑ Floor jack<br />
❑ Razor blade or other sharp, flat edged cutting instrument<br />
❑ Vehicle jackstands<br />
❑ Safety glasses<br />
❑ Timing light<br />
Power Tools<br />
❑ Power drill<br />
❑ Drill bits<br />
You should understand the following skills:<br />
❑ Power tool safety procedures<br />
❑ Undercar safety procedures<br />
❑ Proper measuring techniques<br />
❑ Proper electrical assembly techniques<br />
❑ Basic engine operation and tuning techniques which include:<br />
Fuel pressure measurement techniques<br />
Timing adjustment techniques<br />
℡<br />
Anytime you have questions or concerns with your <strong>Edelbrock</strong> <strong>Nitrous</strong> <strong>System</strong>, please<br />
call our technical support hotline at<br />
1-800-416-8628 before you start your engine.<br />
Catalog #<strong>70055</strong> & #70056<br />
Brochure No. 63-0060<br />
Page 3 of 26<br />
©2002 <strong>Edelbrock</strong> Corporation<br />
Rev. 3/02