Bully Dog 40300 Computer Chip Programmer Installation ... - Jegs
Bully Dog 40300 Computer Chip Programmer Installation ... - Jegs
Bully Dog 40300 Computer Chip Programmer Installation ... - Jegs
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
PARTS DESCRIPTION<br />
Pyrometer Connection Head (PCH) Board Assembly<br />
The PCH Board or Pyrometer Connection Head serves as a dock to connect the pyrometers into the PMT<br />
system. The PCH Board includes the ability to connect two pyrometers. Attached to the PCH Board housing<br />
is a cable with four pin plug which connects to the OBDII Adapter Plug. The list below includes all separate<br />
parts that make up the entire PCH Board Assembly.<br />
• PCH Board<br />
• Velcro<br />
• (2) Self-tapping Sheet Metal Screws<br />
• Pyrometer Cable<br />
Dash/Windshield Mounting Assembly<br />
This mounting assembly is recommended mainly for use on the dash of the vehicle, but can also be used in<br />
the same manner on the windshield of the vehicle. The assembly includes all parts and pieces necessary to<br />
mount the cradle, along with the PMT to the vehicle dash or windshield. The list below includes all parts and<br />
pieces of this assembly (must be assembled by installer):<br />
• Mounting Base<br />
• Top Cradle Arm<br />
• Bottom Cradle Arm<br />
• Top Aluminum Plate<br />
• Bottom Steel Plate (threaded)<br />
• (2) Flat-head Screws<br />
• Double Stick Foam Tape.<br />
Introduction Parts Description<br />
PMT <strong>Installation</strong> Operating Instructions Internet Updates Appendix