Bully Dog 40300 Computer Chip Programmer Installation ... - Jegs

More documents

Recommendations

Info

APPENDIX Introduction Parts Description PMT Installation Operating Instructions Internet Updates Section 3 CUSTOM A- PILLAR PART NUMBER INFORMATION A-Pillar Pod Mount Appendix DESCRIPTION PART # A-Pillar Pod Mount ‘03-’07 Ford 31302 A- Pillar Pod Mount ‘03-’07 Dodge Ram 32303 A- Pillar Pod Mount ‘01-’07 GM with Speaker 33303 A- Pillar Pod Mount ‘01-’07 GM without Speaker 33302 65
Appendix APPENDIX Section 4: PMT Troubleshooting CONDITION POSSIBLE SOURCES ACTION PMT will not turn on Installation/ Connections Make sure that the fuse jack is securely fastened to the fuse socket. Check that the fuse is working properly. Make sure that all of the harnesses are properly installed. If still not working, one of the harnesses could be defective. Check and ensure the proper truck is selected. Will only display pyrometer Improper Truck Selection Make sure you have proper connections everywhere. Also, make sure that there are no bent pins in any of the connectors. Will not adjust horsepower Improper Truck Selection Check and ensure the proper truck is selected. Back light quit working Loose Connections Contact Technical Support if the PMT is otherwise functioning normal. PMT will not display proper temperature EGTs Pyrometer Probe Connections Incorrect Check the orientation of the Pyrometer connections on the PCH to ensure that the Pyrometer leads are properly connected. For more information on up-to-date troubleshooting guide for the PMT, go to www.bullydog.com/Product_Updates.php PMT error codes: For error code information regarding any error codes that appear while operating the PMT visit the web address below: www.bullydog.com/PMT_Tech.php Introduction Parts Description PMT Installation Operating Instructions Internet Updates 66
Page 1 and 2:
INSTALLATION Manual Vehicle Applica
Page 3 and 4:
INTRODUCTION OPERATING INSTRUCTIONS
Page 5 and 6:
BILL OF MATERIALS Bill of Materials
Page 7 and 8:
PARTS DESCRIPTION Pyrometer Connect
Page 9 and 10:
PMT INSTALLATION Installation Overv
Page 11 and 12:
PMT INSTALLATION PMT Installation I
Page 13 and 14:
PMT INSTALLATION 2. With all assemb
Page 15 and 16: PMT INSTALLATION Dash Mounting Dash
Page 17 and 18: PMT INSTALLATION To mount the dash
Page 19 and 20: PMT INSTALLATION Windshield Mountin
Page 21 and 22: PMT INSTALLATION Installing the Pyr
Page 23 and 24: PMT INSTALLATION Post-turbo MOUNT 1
Page 25 and 26: PMT INSTALLATION Section 3: Install
Page 27 and 28: PMT INSTALLATION Section 4: Install
Page 29 and 30: OPERATING INSTRUCTIONS PMT OPERATIN
Page 31 and 32: OPERATING INSTRUCTIONS SETUP WIZARD
Page 33 and 34: OPERATING INSTRUCTIONS Section 3: e
Page 35 and 36: OPERATING INSTRUCTIONS Large Gauge
Page 37 and 38: OPERATING INSTRUCTIONS CHANGE VEHIC
Page 39 and 40: OPERATING INSTRUCTIONS Downloading
Page 41 and 42: OPERATING INSTRUCTIONS Calibrating
Page 43 and 44: OPERATING INSTRUCTIONS Gauge Setup
Page 45 and 46: OPERATING INSTRUCTIONS PMT VEHICLE
Page 47 and 48: OPERATING INSTRUCTIONS Adjust backl
Page 49 and 50: OPERATING INSTRUCTIONS ADJUST VOLUM
Page 51 and 52: OPERATING INSTRUCTIONS Reset to def
Page 53 and 54: OPERATING INSTRUCTIONS Set Defuel L
Page 55 and 56: OPERATING INSTRUCTIONS ADJUST TIRE
Page 57 and 58: OPERATING INSTRUCTIONS SHOW SETTING
Page 59 and 60: OPERATING INSTRUCTIONS NO SD CARD N
Page 61 and 62: INTERNET UPDATES Section 1: PMT Ver
Page 63 and 64: INTERNET UPDATES Section 3: The Upd
Page 65: APPENDIX Section 2: Transmission Re
Page 69 and 70: APPENDIX Appendix 4. With the forma
Page 71 and 72: APPENDIX SECTION 6: warranty & disc
show all

Bully Dog 40300 Computer Chip Programmer Installation ... - Jegs

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?