Bully Dog 40300 Computer Chip Programmer Installation ... - Jegs
Bully Dog 40300 Computer Chip Programmer Installation ... - Jegs
Bully Dog 40300 Computer Chip Programmer Installation ... - Jegs
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
OPERATING INSTRUCTIONS<br />
Introduction Parts Description PMT <strong>Installation</strong> Operating Instructions<br />
Internet Updates Appendix<br />
Section 2: setup WIZARD<br />
The Setup Wizard will take you step by step through the vehicle selection process and download process.<br />
To start the setup wizard follow these three steps:<br />
1. Properly dock the PMT onto the cradle as explained in Section 5 of the installation instructions.<br />
2. Insert the key into the vehicle ignition and turn it to the run position. Do not turn the engine on<br />
at this point.<br />
3. The PMT screen will now light up and the Setup Wizard will appear on the screen.<br />
NOTICE: If this PMT has been previously installed on another vehicle the PMT will not go through the<br />
setup wizard, it will go strait to the Main Screen. To download under this situation you will need to navigate<br />
through the Main Menu to the Change Vehicle menu, select the correct vehicle, and then go into<br />
the Install Download screen to initiate a download.<br />
WELCOME<br />
Welcome to the PMT Wizard.<br />
The next few steps will take you<br />
through the initial setup and<br />
download process.<br />
( Press MORE to continue to the next screen)<br />
It is important that the information displayed throughout the setup wizard is read carefully<br />
before proceeding to the download process.<br />
MORE<br />
29