Bully Dog 40300 Computer Chip Programmer Installation ... - Jegs

More documents

Recommendations

Info

PMT INSTALLATION Introduction Parts Description PMT <strong>Installation</strong> Operating Instructions Internet Updates Appendix To mount the dash assembly: (continued) 2. Once a mounting location is chosen, determine the position of the PMT and direction the PMT will face by moving the ball and socket joints of the dash mount assembly. Once you find the right position tighten down the two Flat-Head screws to secure that position, the screws must be tightened sufficiently to hold the PMT in position. 3. Make sure that the mounting location on the dash is cleaned, preferably with isopropyl alcohol. Peal the backing off of the double stick foam tape on the bottom of the dash mounting base and stick the dash mount assembly along with the cradle to the dash. Press down firmly to ensure that the adhesive reaches full contact with the dash. 4. Run the end of the Cradle Cable down through the driver’s side of the vehicle dash and pull all of the extra slack in the cable down also. The Cradle Cable Plug will need to be connected to the OBDII Adapter Plug and the Power Wire will need to be hooked to a fuse in the vehicle fuse box. Power Wire (To Vehicle Fuse Box) Dash Mount Diagram Dash Mount Assembly with Cradle Cradle Cable (To OBDll Adapter Plug) 17
PMT INSTALLATION Windshield Mounting Follow the same instructions for the dash mount procedure; apply the same instructions to the windshield of the vehicle rather than the dash. Introduction Parts Description PMT <strong>Installation</strong> Operating Instructions Internet Updates Appendix 18
Page 1 and 2: INSTALLATION Manual Vehicle Applica
Page 3 and 4: INTRODUCTION OPERATING INSTRUCTIONS
Page 5 and 6: BILL OF MATERIALS Bill of Materials
Page 7 and 8: PARTS DESCRIPTION Pyrometer Connect
Page 9 and 10: PMT INSTALLATION Installation Overv
Page 11 and 12: PMT INSTALLATION PMT Installation I
Page 13 and 14: PMT INSTALLATION 2. With all assemb
Page 15 and 16: PMT INSTALLATION Dash Mounting Dash
Page 17: PMT INSTALLATION To mount the dash
Page 21 and 22: PMT INSTALLATION Installing the Pyr
Page 23 and 24: PMT INSTALLATION Post-turbo MOUNT 1
Page 25 and 26: PMT INSTALLATION Section 3: Install
Page 27 and 28: PMT INSTALLATION Section 4: Install
Page 29 and 30: OPERATING INSTRUCTIONS PMT OPERATIN
Page 31 and 32: OPERATING INSTRUCTIONS SETUP WIZARD
Page 33 and 34: OPERATING INSTRUCTIONS Section 3: e
Page 35 and 36: OPERATING INSTRUCTIONS Large Gauge
Page 37 and 38: OPERATING INSTRUCTIONS CHANGE VEHIC
Page 39 and 40: OPERATING INSTRUCTIONS Downloading
Page 41 and 42: OPERATING INSTRUCTIONS Calibrating
Page 43 and 44: OPERATING INSTRUCTIONS Gauge Setup
Page 45 and 46: OPERATING INSTRUCTIONS PMT VEHICLE
Page 47 and 48: OPERATING INSTRUCTIONS Adjust backl
Page 49 and 50: OPERATING INSTRUCTIONS ADJUST VOLUM
Page 51 and 52: OPERATING INSTRUCTIONS Reset to def
Page 53 and 54: OPERATING INSTRUCTIONS Set Defuel L
Page 55 and 56: OPERATING INSTRUCTIONS ADJUST TIRE
Page 57 and 58: OPERATING INSTRUCTIONS SHOW SETTING
Page 59 and 60: OPERATING INSTRUCTIONS NO SD CARD N
Page 61 and 62: INTERNET UPDATES Section 1: PMT Ver
Page 63 and 64: INTERNET UPDATES Section 3: The Upd
Page 65 and 66: APPENDIX Section 2: Transmission Re
Page 67 and 68: Appendix APPENDIX Section 4: PMT Tr
Page 69 and 70:
APPENDIX Appendix 4. With the forma
Page 71 and 72:
APPENDIX SECTION 6: warranty & disc
show all

Bully Dog 40300 Computer Chip Programmer Installation ... - Jegs

Create successful ePaper yourself

Delete template?

Save as template?