ELEMEnTS - Jardin-Confort
ELEMEnTS - Jardin-Confort
ELEMEnTS - Jardin-Confort
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
tabletops (teak + silestone ® + Trespa ® + acid etched glass)<br />
teak<br />
glASS (ACID ETCHED GLASS)<br />
Teak<br />
T<br />
aged Teak<br />
AT<br />
• Superior quality teak wood (VINIR & HARA)<br />
aged 60 to 80 years, sourced from<br />
ecological plantations<br />
• Great stability under the effect of UV radiation,<br />
chlorine and sea water<br />
• Easy to clean, various specific treatments possible<br />
(see Manutti care line)<br />
• For outdoor and indoor use<br />
• 100% recyclable<br />
white<br />
GLW<br />
taupe<br />
GLT<br />
sand<br />
GLs<br />
black<br />
GLB<br />
• Hardened glass, acid etched on the top, coloured on the bottom side.<br />
Specific gravity: 2.5 kg<br />
• Colour fastness : differences in colour between different table tops<br />
can occur. These are caused by the different production batches in<br />
which they were made. A colour difference of delta E = 2, measured on<br />
the surface of the glass, is acceptable<br />
• Tensile strength: intrinsic tensile strength 10,000 N/mm 2<br />
• Scratch resistance: no value available, but clearly sharp objects may<br />
cause scratches on the surface of the glass<br />
• Thermal conductivity: 0.8 W/mK<br />
• For outdoor and indoor use<br />
silestone ®<br />
TAUPE<br />
SIT<br />
BLACK<br />
SIB<br />
Silestone is a material that consists mainly of quartz and a series of organic components, the composition of<br />
which may vary according to the colour. Polyester resin is used as a binding agent. This results in a product<br />
that is very strong, not very porous and very bacteria resistant.<br />
Silestone is resistant to most household cleaning products and acids.<br />
Manutti uses a UV-resistant silestone specially developed for outdoor use.<br />
• For outdoor and indoor use<br />
Test unit Standard<br />
Compressive strength 110-210 Mpa nEN EN-14617-15<br />
Bending strength 40-68 Mpa nEN EN-14617-2<br />
Shock resistance 60-97 cm nEN EN-14617-9<br />
Thermal shock 30-71 Mpa nEN EN-14617-6<br />
Porosity 0.07-0.18% NEN EN-14617-1<br />
Density 2230-2458 kg/m 3 NEN EN-14617-1<br />
Surface hardness 5-7 Mohs scale nEN EN 101<br />
Wear resistance 26-31 mm nEN EN-14617-4<br />
trespa ® (hpl)<br />
Trespa is a flat thermo hardening resin-based sheet, homogenously<br />
reinforced with wood-based fibres and manufactured at high pressure and<br />
temperature. (HPL – High Pressure Laminate). The visible side is covered in a<br />
decorative surface using the patented EBC technology.<br />
For this Manutti works with 13 mm thick sheets.<br />
For all colours the border has a black finish.<br />
• For outdoor and indoor use<br />
Material properties Trespa Meteon:<br />
Specific gravity 1350 kg/m 2 iSO 1183<br />
Colourfastness 4 – 5 iSO 105A02-93<br />
(3000 hrs, Xenon test)<br />
Tensile strength > 70 N/mm 2 iSO 527-2<br />
Scratch resistance > 3.5 N EN 438<br />
Heat conduction coefficient +/- 0.3 W/mk din 52612<br />
Fire behaviour type FR : class A1 S21-2003<br />
WHITE<br />
TRW<br />
Stone grey<br />
TRS<br />
BLACK<br />
TRB<br />
ceramic<br />
cloud grey<br />
ceg<br />
silk grey<br />
ces<br />
charcoal<br />
ceb<br />
Quartz<br />
ceQ<br />
bluestone<br />
ceP<br />
white (5mm)<br />
cew<br />
The ceramic tops Manutti uses for its tables are composed of a mixture of sand, clay and natural stone. These composites are mixed, rinsed and atomised into tiny particles of only a few<br />
microns. A paste is formed which is laid out into a layer of 3mm and pressed together with 180 ton pressure. After this procedure, this paste gets a layer of coulor pigments that mainly<br />
consist of glass particles of a few microns large. Subsequently the paste is baked in a tunnel oven of 30m length at 1100° Celsius. The baked product is cooled down for a few minutes<br />
by cold air turbines. 2 of these finished plates (1000x3000x3mm) are glued together while still being warm with a glass fibre cloth and a special 2 components glue at a pressure of 70<br />
ton. This process results in a light plate of 7mm that is as good as imperishable and which is ideally suited for use as a table top, particularly for outdoor applications.<br />
Test Standard unit<br />
Compressive Strength in N ISO 10545-4 average 1500 N<br />
Bending Strength in N/mm 2 ISO 10545-4 average 50<br />
Shock Resistance iSO 10545-5 average 0,8<br />
Thermal Shock iSO 10545-9 resistant<br />
Porosity ISO 10545-3 + ASTM C373 < 0,3 %<br />
Density nEN EN- 14617-1 16 kg/m 2<br />
Surface Hardness uni EN 101 ≥ 6 Mohs Scale<br />
Chemical Resistance iSO 10545-13 no visible effect<br />
Stain Resistance iSO 10545-14 class 5<br />
Resistance to deep abrasion ISO 10545-6 175 mm 3<br />
Frost Resistance iSO 10545-12 resistant<br />
Coefficient Of Friction aSTM C-1028 µ > 0,6<br />
Fire Reaction EN 13501 (rev. 2005) A 2 - s1, d0<br />
139<br />
general information<br />
G/a/s
Change language