MAC 5000 Resting ECG Analysis System ... - Jaken Medical...

Equipment Overview: Getting Started
Start Up Screen (Exercise Option)
AB C D E F G H I J K L
Name
A system
messages
B current heart
rate bar graph
0:20 EXERCISE
155
0:20 STAGE 1
TREADMILL
10 Watts
Waiting for Stable Heart Rate
V1
II
V5
Patient Data
75
120/80
BPM
MD1207-028D
Description
Error or informational messages appear in this area.
The top horizontal line is the maximum predicted
heart rate (220 - age). The line below that is the
target heart rate (a percentage of 220 - age). At the
start of EXERCISE phase, a third line representing
the resting heart rate will appear.
Name
Description
C workload level Indicates the units of measurement and can be
changed.
D
phase and
stage clocks
The top clock displays the total time in a phase. The
bottom clock displays the time in a stage. During the
TEST-END phase, the top clock displays the total
time in the EXERCISE phase and the bottom clock
displays the total time in the RECOVERY phase.
E current phase Top is phase name, bottom it stage name.
and stage name
F protocol name
G Rhythm formats Use System Setup (see Chapter 14, “Defining the
System Setup”) or Ld Select to change the leads
displayed and printed.
H medians Current, pretest.
I
J
systolic/
diastolic blood
pressures
current heart
rate
The BP numbers become dim if the BP has not
changed in over one minute.
Determined by the three leads displayed on your
screen during the PRE-TEST phase.
K function icon Indicates the Main Menu function the system is
using. This is the Exercise function.
L
battery status
icon
Indicates how much charge the battery has
available.
MAC 5000 System — 2000657-033, Revision A 2-19